Belkin Setup

Belkin.Setup - How to Setup Belkin Range Extender?

Belkin.Setup

When it comes to connectivity devices, Belkin stands at the top of the list. It manufactures various consumer and commercial product lines, including network switches, Belkin routers, hubs, mobile computing accessories, and other peripheral devices. Belkin has a wide range of routers and extenders that are used by people worldwide.

The users who face issues with their internet, like connectivity issues, poor internet performance, should prefer using the Belkin router. However, the Belkin routers will help the users to get rid of these issues. 

For all users, we have here described the steps through which they can quickly login and perform the Belkin.Setup procedure via Belkin.Range.

Steps for Belkin Router Login

The users who are willing to change their Belkin router settings should access the Belkin router login page. However, through the login page, the user can easily make changes in their existing network settings. 

  • The users should first attach the router to the modem and then to the system via Ethernet Cable.
  • After that, turn “ON” the system.
  • Now open the web browser.
  • Then enter “192.168.2.1” (i.e., the router’s default IP address) in the browser’s address bar.
  • After this, the login page will get open on the screen.
  • From there, click on the “Login” button.
  • Then the users are suggested to enter the username and the password.
  • After this, there is an option available, i.e., “Internet WAN.”
  • Then the users are advised to click on it.
  • After that, once the user clicks on that, they will get redirected to the “Connection type” option.
  • From there, select the connection type and hit on the “Next” option.
  • Note: The users will have to type the connection type; they are advised to ask for the connection type from the internet service provider.
  • After entering the required details, click on the “Submit” option.

So through the following steps mentioned above, the users can easily login to their Belkin router. Moreover, after this, proceed further with the steps regarding the Belkin.Setup process.

Steps to setup Belkin Router

The users are suggested to perform the steps required to accomplish the Belkin.Setup procedure. However, once the user is done with the setup procedure, then they can use the router to its full potential. 

Power cycle the modem & router

  • The users are suggested to unplug the modem and the router from the power source in the beginning.
  • After this, connect the ethernet cable from the modem to the “WAN (Wide area network)” or “Internet port” of the router.
  • Now carefully power “ON” the modem first and then the router by plugging them back to the power source.

Manual procedure to set up the router

Follow the manual steps to accomplish the Belkin Setup process.

  • First of all, connect the system to one of the router’s ethernet ports.
  • Then open the web browser.
  • Now type in the IP address in the address bar.
  • Note: The Belkin Router’s default IP address is “192.168.2.1.”
  • After this, click on the “Login” option.
  • Now the users are suggested to leave the password field blank and tap on the “Submit” option.
  • Then under the “Internet WAN,” click on the “Connection Type” option.
  • After this, the users are advised to select their connection type and click on the “Next” option.
  • Note: The users are advised to contact their Internet Service Provider (ISP) if they don’t know their connection type.
  • Then enter the details provided by the IPS and hit on the “Apply Changes” option.

Once the user applies these steps, they can easily execute the Belkin.Setup procedure. Additionally, for all users, we have also discussed the steps on how to configure the Belkin Router.

Steps to Configure Belkin Router

After applying the steps provided above, it would get easy for the users to carry out the Belkin.Setup procedure. Therefore, follow the steps mentioned below to configure the Belkin router.

  • Firstly open the internet browser on the system and then type “192.168.2.1” in the address bar.
  • Then click on the “DNS” settings option provided under the “Internet WAN” option.
  • After this, the users are advised to enter the router’s password for authentication.
  • Then uncheck the box provided next to “Automatic” and enter the “Open DNS Addresses.”
  • After this, the users are advised to pen down the current DNS settings before making any changes.
  • Note: The address for Open DNS is “208.67.222.222” & “208.67.220.220.”
  • Then hit on the “Apply” option and then save changes.

So this was all about the Belkin.Setup, login, and configure procedure. Hope that the details provided above were informative. However, if any user encounters an issue, they should take help from the Belkin Customer Service team.